光亮剂在生产的过程中起泡的原因其实很简单，因为其光亮剂的主要成分为多种表面活性剂、渗透剂、溶剂。
The reason why brighteners foam in the process of production is very simple, because the main components of brighteners are various surfactants, penetrants and solvents.
在对金属表面进行消磨和精整的过程中，使用了光亮剂，由于摩擦和搅拌作用，于是金属加工溶液中出现了许多气泡。
In the process of polishing and finishing metal surface, brightener is used. Because of friction and stirring, many bubbles appear in metal processing solution.
这些气泡往往会影响了光亮剂性能的发挥，使除油效果、金属表面光泽不佳，工件部分轻微氧化。若累积的泡沫超过液槽高度后开始溢出，不仅拖延了生产效率，增加成本，还会污染地面。
These bubbles often affect the performance of brightener, resulting in poor oil removal effect, poor surface gloss and slight oxidation of part of the workpiece. If the accumulated foam begins to overflow beyond the height of the tank, it will not only delay the production efficiency, increase the cost, but also pollute the ground.