| 铜材光亮剂使用方法及注意事项 |
| 添加时间：2019/12/31 16:08:12 浏览次数： |
| 铜材光亮剂使用方法： Usage of Copper brightener: 1、配合磨料使用，可用于振动光饰机和滚筒光饰机中。 1. It can be used in vibration finishing machine and roller finishing machine. 2、物料配比：400千克钢珠+50千克工件+1千克光亮剂。 2. Material ratio: 400kg steel ball + 50kg workpiece + 1kg brightener. 3、滚筒滚动或光饰研磨机抛光，时间以工件光亮为准约30-50分钟，将抛光液排除，用水冲洗干净，离心甩干、风干或晾干，进行钝化或防变色处理。 3. The polishing time is 30-50 minutes based on the brightness of the workpiece. Remove the polishing liquid, wash it with water, dry it by centrifugation, air or air, passivate or prevent discoloration. 铜材光亮剂注意事项： Precautions for Copper brightener: 1、触皮肤，勿入眼口，如误触，立即用清水冲干净，远离光热，单独存放； 1. Do not enter the eyes when touching the skin. If it is touched by mistake, wash it with clear water immediately, keep away from light and heat, and store it separately; 2、废液进行无污染无危害处理后排放，符合环保。 2. The waste liquid is discharged after no pollution and no harm treatment, which conforms to the environmental protection. 根据用户铜材材质的差异及不同污垢的种类，专业配制了用于清洗铜材油性污垢的清洗剂，清洗铜材氧化变色层的清洗剂，能达到铜材镜面效果的光亮清洗剂，以及防止铜材氧化变色的防变色剂，铜材清洗、光亮原则上一定要在技术人员指导下严格按工艺流程进行处理。 According to the difference of copper material and different kinds of dirt, the cleaning agent for cleaning oil dirt and oxidation discoloration layer of copper material is specially prepared, which can achieve the mirror effect of copper material and prevent the discoloration of copper material. In principle, the cleaning and brightness of copper material must be carried out in strict accordance with the process flow under the guidance of technical personnel Handle. |
| 上一页 光亮剂的功效 |
| 下一页 铜材光亮剂使用方法 |
Copyright © 技术支持：遨游网络